Galvanized Steel Sheet

Product name : G40 Galvanized Sheet

Product model :

Product No. :

Previous Last Return List

Online Inquiry +8619527892090

Details:

Product Description G40 Galvanized Sheet

The coating designation G40 represents the type of coating and the weight of the applied coating. The letter “G” indicates that the coating is galvanized, meaning zinc-based. Meanwhile, the number “40” represents the thickness of zinc on the surface of the steel sheet. Galvanized steel sheets are covered with a zinc coating to provide corrosion resistance. The G40 protective coating prevents moisture from reaching the steel structure, thereby improving the corrosion resistance of the steel. This can extend the life expectancy of the steel. G40 is the average coat weight and therefore provides moderate protection.

Product Parameters

Product Name	G40 Galvanized Sheet
Thickness	0.12mm-6.00mm
Width	600mm-1500mm
Length	1m-12m, Support Customization
Standard	AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc.
Zinc Layer	Hot Galvanizing: 60-275g/m²
Zinc Layer	Hot dipped galvanzied: 30-275g/㎡

Chemical Composition

Standard	Grade	C	Si	Mn	P	S	Ti
Forcold Forming Chinese Standard	DX51D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX52D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX53D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX54D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX56D+Z	0.12	0.50	0.60	0.100	0.045	0.30
	DX57D+Z	0.12	0.50	0.60	0.100	0.045	0.30
Forcold Forming Japanese Standard	SGCC	0.15	0.50	0.80	0.050	0.030	0.025
	SGCD1 SGCD2	0.12 0.10	0.50 0.50	0.60 0.45	0.040 0.030	0.030 0.030	0.025 0.025
	SGCD3	0.08	0.50	0.45	0.030	0.030	0.025
	SGCD4	0.06	0.50	0.45	0.030	0.030	0.025
For Structure Japanese Standard	SGC340	0.25	0.50	1.70	0.200	0.035	0.025
	SGC400 SGC440	0.25 0.25	0.50 0.50	1.70 2.00	0.200 0.200	0.035 0.035	0.150 0.150
	SGC490	0.30	0.50	2.00	0.200	0.035	0.025
	SGC510	0.30	0.50	2.50	0.200	0.035	0.025
For Structure AISI Standard	S220GD+Z	0.20	0.60	0.70	0.100	0.045	0.025
	S250GD+Z	0.20	0.60	0.70	0.100	0.045	0.025
	S280GD+Z	0.20	0.60	0.70	0.100	0.045	0.025
	S320GD+Z	0.20	0.60	0.70	0.100	0.045	0.025
	S350GD+Z	0.20	0.60	0.70	0.100	0.045	0.150
	S550GD+Z	0.20	0.60	0.70	0.100	0.045	0.150

Mechanical Properties

Grade	Yield Strength MPa≥	Tensile Strength MPa≥	Elongation A%≥
DX51D Z/ZM/AZ/AM	240-380	270-500	22
DX52D Z/ZM/AZ/AM	140-300	270-420	26
DX53D Z/ZM/AZ/AM	140-260	270-380	30
DX54D Z/ZM/AZ/AM	120-220	260-350	36
S220GD Z/ZM/AM	220	300	20
S250GD Z/ZM/AZ/AM	250	330	19
S280GD Z/ZM/AM	280	360	18
S300GD A/AM	300	380	18
S320GD Z/ZM/AM	320	390	17
S350GD Z/ZM/AZ/AM	350	420	16
S450GD A/AM	450	480	15
S550GD Z/ZM/AZ/AM	550	550	–

Product Specifications

Type	Thickness(mm)	Width(mm)
Type	Thickness(mm)	1219	1500	1800	2000
Cold Rolled	0.3	√	√	√	√
	0.4	√	√	√	√
	0.5	√	√	√	√
	0.6	√	√	√	√
	0.7	√	√	√	√
	0.8	√	√	√	√
	0.9	√	√	√	√
	1.0	√	√	√	√
	1.2	√	√	√	√
	1.5	√	√	√	√
	1.8	√	√	√	√
	2.0	√	√	√	√
	2.5	√	√	√	√
	3.0	√	√	√	√
	4.0	√	√	√	√
	5.0	√	√	√	√
	6.0	√	√	√	√
Hot Rolled	4.0	√	√	√	√
	5.0	√	√	√	√
	6.0	√	√	√	√
	8.0	√	√	√	√
	10.0	√	√	√	√
	12.0	√	√	√	√
	14.0	√	√	√	√
	16.0	√	√	√	√
Or according to the size requested by the customer

Galvanized steel plate is coated with a layer of metal zinc to prevent corrosion on the surfaceof the steel plate and extend its service life.
Commonly used materials includeDX51D/SGCC，DX51D Z150，DX52D/SGCD1，Z275,Z120,G40,G60,G90etc.

Technical Data:

Qualifications

Honors